Panasonic DMR-EZ45VEB Service Manual page 15

Error Code Diagnosis contents
U88 The unit is carrying out its
recovery process (with no
disc in the disc tray).
U99 Hang-up
F00 No error information
F58 Drive hardware error
F34 Initialization error when main
microprocessor is started up
for program recording
UN- Unsupported disc error
SUPPORT
NO READ Disc read error
HARD Drive error
ERR
SELF Restoration operation
CHECK
PLEASE Unit is in termination process Unit is in termination process now.
WAIT
Description
* The unit detected an error while recording
or playing with with no disc in the disc
tray.
The unit is carrying out its recovery process.
This process restores the unit to normal
operation. The unit is not broken. Wait until
the message disappears.
Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.
Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit
initialization.)
When drive unit error is detected, the event
is saved in memory.
When initialization error is detected after
starting up main microprocessor for program
recording, the power is turned off
automatically.
The event is saved in memory.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
*A disc is flawed or dirty.
*A poor quality failed to start.
*The track information could not be read.
The drive detected a hard error.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It will OK, if a display disappears
automatically. If a display does not
disappear, there is the possibility that
defective Digital P.C.B. / RAM drive.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
15
Monitor Display Automatic FL display
No display
No display
Displayed is left until the [POWER]
key is pressed.
No display No display
No display No display
No display No display
"This disc is
incompatible."
Display for 5 seconds.
"Cannot read.
Please check the
disc."
"DVD drive error." Display for 5 seconds.
No display
No display
DMR-EZ45VEB