Using Diagnostics - Motorola DCT700 Installation Manual

B-2 Diagnostics

Using Diagnostics

To access and navigate the diagnostics using the Motorola universal remote control:
Press to turn on the set-top.
1
POWER
Wait five seconds and then press
2
To enable diagnostic mode, press
3
DIAGNOSTICS main menu is displayed on the OSD:
DIAGNOSTICS
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
18
19
20
21
Use the or cursor keys to select the desired diagnostic.
4
CHANNEL
Press cursor <, cursor >,
5
To exit the diagnostic mode, press
6
diagnostic mode and powers off.
DCT700 Installation Manual
again to turn off the set-top.
POWER
within two seconds after powering off. The
OK
GENERAL STATUS
OOB STATUS
IN BAND STATUS
AUDIO/VIDEO STATUS
UNIT ADDRESS
FIRMWARE VERSION
CURRENT CHANNEL STATUS
RENEWABLE SECURITY
UPSTREAM MODEM
APP CODE MODULES
MEMORY CONFIG
INTERACTIVE INFO
MAC FREQUENCY TABLE
CONTROL CHANNELS
MESSAGE TYPES
IN BAND PAT
IN BAND PMT
TASK STATUS
USB STATUS
IB MCA STATUS
KEYBOARD / LED
, or to run the selected diagnostic.
ENTER OK
on the remote control. The set-top exits the
POWER