Error Messages List - Intel SS4000-E Troubleshooting Manual

Error Messages List

Message Type
ID
60006 Critical
60010 Warning
60003 Warning
60004 Warning
60005 Warning
N/A Critical
60210 Warning
60212 Warning
60011 Warning
60014 Warning Storage initializing
60017 Warning
Message Description
System shutting down
due to high temperature
on sensor (1, 2, or 3)
System upgraded from
[%1] to [%2]
The storage space for
backup is [%1] full.
(Threshold is [%2])
The storage space for
NAS is [%1] full.
(Threshold is [%2])
The storage space in
USB device(s) is [%1]
full. (Threshold is [%2])
Network connection lost
(Port %s)
Shared folder [%1] now
unavailable to [%2]
Shared folder [%1] now
unavailable to ma-
chine(s) [%2]
Disk [%1] has been
removed
Disk error -- storage
now operating in de-
Probable Cause
Fan in the system is not
functioning or room tem-
perature is too high
Firmware of the system
has been upgraded
The storage space for
backup is almost full.
The allocated space for
Shared Folder is almost
full
The storage space in the
connected USB device is
almost full
Network connection of the
specified port has been
lost
The privilege for
specified user to access
the previously assigned
shred folder has been
removed
The privilege for
specified computer to ac-
cess the previously as-
signed shred folder has
been removed
The disk has been re-
moved or broken
RAID has been configured
and is initializing
One or more disks in the
RAID set might be dam-
Suggested Action
Make sure the fan in the
system is working properly
and the room temperature
is not too high
Make sure the firmware
upgrade is an intended ac-
tion
Review your storage utiliza-
tion to make some rooms
for backup.
You can expand the shared
folder size from the Ad-
vanced ->
NOTE: This action is dis-
tructive. Backup data before
expanding the folder size.
You can either make some
room in the USB device, or
disconnect the USB device
Please check your network
connections (including the
cable, switch/hub) are se-
cured
the
Make sure the privilege
change is an intended ac-
tion
the
Make sure the privilege
change is an intended ac-
tion
Make sure removing disk is
an intended action
Please wait till the initializa-
tion is completed
Please contact your disk
manufacturer to get the
Disks link.