Page 3
AC line voltage switch (17) allows reconfiguring amplifier for either 110-120V or 220-240V AC lines. • Signal LEDs and Clip LEDs for better control on X1, X2, X3 amplifers Output Section: • Large VU-meters and Clip LEDs for better control on X4 amplifier Disconnect unit from the AC power source before making any •...
remains on or flashes repeatedly, reduce the signal level by lowering functions. If one of these situations occurs, the amplifier senses the input level control for the channel that is clipping or reduce the the problem and automatically switches into protection mode. The level at the source.
• CHECK THAT THE FUSE TYPE AND RATING IS CORRECT. PROTECT LED STAYS ON WITH NO • FAILED AMPLIFIER. • CONTACT THE GEMINI SERVICE DEPARTMENT OR SPEAKERS CONNECTED AND WITH THE YOUR AUTHORIZED DEALER TO SPEAK TO A AMPLIFIER COOLED DOWN.
Page 15
061-112 METAL FILM RESISTORS 1/ 4W 86.6KΩ 1% 080-085 LED (RED) 5φ 061-108 METAL FILM RESISTORS 1/ 080-110 LED (YELLOW) 5φ 4W 1MΩ 1% 080-086 LED (GREEN) 5φ 061-106 METAL FILM RESISTORS 1/ 4W 2.21KΩ 1% 071-220 ROTARY VR 10KA L:15MM 081-023 SLIDE SWITCH 2P2C UL 060-218...
080-085 LED (RED) 5φ 061-112 METAL FILM RESISTORS 080-110 LED (YELLOW) 5φ 1/4W 86.6KΩ 1% 080-086 LED (GREEN) 5φ 061-108 METAL FILM RESISTORS 1/4W 1MΩ 1% 071-220 ROTARY VR 10KA L:15MM 061-106 METAL FILM RESISTORS 081-023 SLIDE SWITCH 2P2C UL 1/4W 2.21KΩ...