5 6 | Bosch Climate 5000 AA Series Split Type Ductless Air Conditioner / Heat Pump
4.
Disconnect the connector for fan motor from the electronic control board.
Figure 62
5.
Remove the four fi xing screws of the fan motor, then remove the motor.
Figure 63
Data subject to change
Removing the electrical parts
1.
After removing the panel plate and fan assembly, remove the connector for
the compressor.
Figure 64
2.
Pull out the two blue wires connected with the four way valve.
Figure 65
3.
Pull out connectors of the condenser coil temp. sensor(T3),outdoor ambient
temp. sensor(T4) and discharge temp. sensor(T5).
Figure 66
Service Manual
02.2018 | Bosch Thermotechnology Corp.