Planet Networking & Communication WIPG-300H User Manual page 16

When the projector shows the default screen as shown below, it indicates the WIPG-300H is ready
Step 2.
now.
Use your laptop or desktop for site surveying the wireless signal of the WIPG-300H, and connect
Step 3.
your PC with it wirelessly. The default SSID is WIPG-300H.
Open the web browser and it will redirect to the WIPG-300H web page automatically, or you can
Step 4.
enter the default IP address 192.168.1.1 to access it.
PLANET 802.11n Wireless Interactive Presentation Gateway
Figure 2-4 Projector Default Screen
Figure 2-5 Windows Platform Wireless Site Survey
16
WIPG-300H