Cisco Catalyst 3850 Deployment Manual page 39

Hide thumbs Also See for Catalyst 3850:

Table of Contents

The next step is to configure service set identifiers (SSIDs), define wireless LAN (WLAN) on the switch, with

corresponding VLAN used for wireless clients, the authentication and ciphers method, and the AAA server profile

to use for this WLAN. In the following example, the name of the SSID is Cisco123, using the client VLAN 500 we

defined for wireless clients, and enabling WPA, WPA2 with TKIP, using 802.1X authentication with the AAA server

defined elsewhere in the configuration.

To configure an open SSID, use the no security wpa command in the WLAN configuration.

To configure preshared key (PSK) security, use these commands:

This example shows output from the show wireless mobility summary command:

This example shows output from the show wlan summary command:

Page 39 of 54

Table of Contents