Ap-Count License In A Stack - Cisco Catalyst 3850 Deployment Manual

To enable the member switch to join the stack, change the license level of the member switch (switch 2) by
activating the license from the active switch console:
After switch 2 reloads successfully, it joins the stack with the active switch.

AP-Count License in a Stack

AP-Count license is available only with IP Base and IP Services licenses. A Cisco Catalyst 3850 Switch stack can
support a maximum of 50 access points. An AP-Count license is required only if a Cisco Catalyst 3850 Switch is
configured as both a mobility controller and a mobility agent. An AP-Count license is not needed if the Cisco
Catalyst 3850 Switch is configured only as an mobility agent, which is the default configuration. For details on
mobility agent, mobility controller, and other wireless and mobility-related entities, refer to the Cisco Catalyst 3850
Switch converged access section.
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. Page 20 of 54