AT&T DLC-100 User Manual page 60

CP-01-2010 Supported Features for False Alarm
Reduction
Digital Life CP-01
Feature Feature
Name Name
Fire Alarm Fire Alarm
Verification Verification
Alarm Panel Security Code
PIN
Duress PIN Duress Code
Digital Life User Manual
Settings
Enabled/Disabled
Mandatory
Enabled/Disabled
|
Page 50 of 62
Default
Setting Feature Description
specified number of alarms caused
by the same intrusion device within
the same arming period, the system
will shutdown that intrusion device
for the remainder of the arming
period. This reduces the number of
alarms sent to the AT&T Digital Life
Central Monitoring Center. The
default count setting is two (2) trips.
Disabled The Fire Alarm Verification feature is
utilized to reduce the number of false
alarms that are reported to the AT&T
Digital Life Central Monitoring
Center. When the feature is enabled,
the DLC-100 must receive two
smoke detection messages from a
smoke detector before reporting a
smoke alarm to the AT&T Digital Life
Central Monitoring Center. When the
feature is not enabled, if the DLC-
100 receives one (1) smoke
detection message from a smoke
detector, a smoke alarm is reported
to the AT&T Digital Life Central
Monitoring Center. The DLC-100
alarm verification period is twenty
(20) seconds.
Mandatory The Alarm Panel PIN is a four (4)
digit code used by you to disarm
your system or clear an alarm and
must be created by you. The Alarm
Panel PIN and Duress PIN must be
different. You must create your
mandatory Alarm Panel PIN by
speaking with a Digital Life Customer
Care Technical Support agent or
accessing www.att.com/dlpin.
Disabled A Duress PIN is an optional four (4)
digit code and must be created by
you. A duress signal is sent to the
AT&T Digital Life Central Monitoring
Center by you entering your Duress
PIN on a keypad when you feel
threatened due to one, or more,
person(s) trying to force you to enter
or re-enter the premises. You create
your optional Duress PIN by
ATT-UM-V1.1-201303