AT&T DLC-100 User Manual page 59

CP-01-2010 Supported Features for False Alarm
Reduction
Digital Life CP-01
Feature Feature
Name Name
Abort Delay Abort Window
– for Non-Fire
Zones
(Windows)
Abort Abort
Sound Annunciation
Cancel Cancel
Sound Annunciation
Cross Cross Zoning
Zoning
Swinger Swinger
Shutdown Shutdown
Trips
Digital Life User Manual
Settings
Enabled/Disabled
with a range of
zero (0) to forty-
five (45) seconds
Enabled/Disabled
Enabled/Disabled
Enabled/Disabled
with a range of
one (1) to thirty
(30) seconds
Enabled/Disabled
with one (1) to six
(6) trips
|
Page 49 of 62
Default
Setting Feature Description
Enabled The Abort Delay feature is the time
with thirty delay between when an alarm has
(30) been triggered locally and when the
second alarm is actually sent to the AT&T
delay Digital Life Central Monitoring
Center. The Abort Delay feature
enables you time to enter your Alarm
Panel PIN into a keypad in order to
disarm the system and cancel the
alarm before it is reported to the
AT&T Digital Life Central Monitoring
Center.
NOTE: Consult with your Digital Life
Technician to determine if your
system is configured with a
communicator delay (Abort Delay).
An Abort Delay will prevent a report
to the AT&T Digital Life Central
Monitoring Center if your DLC-100 is
disarmed within thirty (30) to forty-
five (45) seconds after an intrusion
alarm is triggered. Note that fire-type
alarms are normally reported without
a delay.
Enabled The Abort Sound feature generates
one (1) long beep from the keypad
when you abort an alarm during the
Abort Delay Time interval.
Enabled The Cancel Sound feature generates
two (2) long beeps from the keypad
when you cancel an alarm.
Disabled Cross zoning is a configuring of logic
within the alarm panel such that two,
or more, zones of the security
system are interdependent in
causing an alarm. This feature is set
per device and disabled by default.
Enabled Swinger Shutdown is a false alarm
with two prevention feature that counts the
(2) trips number of alarms caused by a
specific intrusion device. The system
will auto-bypass a specific intrusion
device based on the swinger
shutdown count setting. After a
ATT-UM-V1.1-201303