Cisco 7905G Administrator's Manual page 132

Call Preference Parameters
Table 8-3 Call Preference Parameters
Parameter
Allow Call Waiting
(on web page)
CallWaiting
(in profile)
Allow Call Transfer
(on web page)
AttendedTransfer
(in profile)
Allow Blind Transfer
(on web page)
BlindTransfer
(in profile)
Allow Conference
(on web page)
Conference
(in profile)
Cisco IP Phone Models 7905G and 7912G Administrator Guide (SIP)
8-14
Description
Whether the call waiting feature is enabled on a phone.
0=Disable the call waiting feature.
•
• 1=Enable the call waiting feature.
Value type: Boolean.
Default value: 1
Whether the call transfer feature is enabled on a phone. If this feature is
enabled, the Trnsfer softkey will appear when appropriate, allowing a user to
transfer a call. If this feature is disabled, this softkey will never be available.
0=Disable the call transfer feature.
•
1=Enable the call transfer feature.
•
Value type: Boolean.
Default value: 1
Whether the blind call transfer feature is enabled on a phone. If this feature is
enabled, the BlndXfr softkey will appear when appropriate, allowing a blind
transfer of a call. If this feature is disabled, this softkey will never be available.
0=Disable the blind call transfer feature.
•
1=Enable the blind call transfer feature.
•
Value type: Boolean.
Default value: 1
Whether the conference feature is enabled on a phone. If this feature is
enabled, the Confrn softkey will appear when appropriate, allowing a
three-way conference to be established. If this feature is disabled, this softkey
will never be available.
0=Disable the conference feature.
•
1=Enable the conference feature.
•
Value type: Boolean.
Default value: 1
Chapter 8 Profile and Web Page Parameters and Defaults
OL-4277-01