Consumables And Replacement Parts - Samsung ML-2251N/XAA Service Manual

6.5 Consumables and Replacement Parts

The life cycle outlined below is a general guideline for maintenance purposes and is for reference only.
Environmental conditions (temperature, humidity, dust etc.) and actual use can cause these figures to vary.
COMPONENT
Transfer Roller
Fuser
Toner Cartridge
6.6 The LED Status Display by Each Error
ERROR
Open Fuser Error
Over Heat Error
Low Heat Error
LSU not Ready Error
(Pmotor Error)
LSU Not Ready Error
(HSYNC Error)
Samsung Electronics
The [Error] LED (red) and the [Toner Save] LED are simultaneously
flashing at 1 second intervals.
The [Error] LED (orange) and the [Toner Save] LED are
simultaneously flashing at 1 second intervals.
The [Error] LED (red) and the [Toner Save] LED are simultaneously
flashing at 4 second intervals.
The [Error] LED (green) and the [Toner Save] LED are
simultaneously at 1 second intervals.
The printing is stop in the fad status, and the [Error] LED (green) and
the [Toner Save] LED are simultaneously flashing at 4 second intervals.
REPLACEMENT CYCLE
60,000 Pages
80,000 Pages
5,000 Pages
5,000 Pages
LED Status
ALIGNMENT & A D J U S T M E N T S
cartridge supplied with set
replacement cartridge
DCU CODE
60
68
62
95
96
Service Manual
6-13