NETGEAR ProSAFE S3300 Hardware Installation Manual page 34

Physical and Technical Specifications
B.
This appendix provides the physical and technical specifications for the S3300 Smart Switch.
Table 7. Physical and technical specifications
Feature
Network protocols and
supported standards
Interfaces
LEDs
Memory
Description
• IEEE 802.3i (10BASE-T)
• IEEE 802.3u (100BASE-TX)
• IEEE 802.3ab (1000BASE-T)
• IEEE 802.3an (10GBASE-T)
• IEEE 802.3z (1000BASE-X)
• IEEE 802.3 Clause 49 (10GBASE-LR and 10GBASE-SR)
• IEEE802.aq (10GBASE-LRM)
• IEEE802.3ae (10GBASE Ethernet)
• IEEE802.3az (Energy Efficient Ethernet)
• IEEE 802.3x (Full-duplex flow control)
• IEEE 802.1at (PoE+)
• S3300-52X and S3300-52X-PoE+: forty eight 10/100/1000 Mbps ports
• S3300-28X and S3300-28X-PoE+: twenty four 10/100/1000 Mbps ports
• Two 100M/1G/10GBASE-T ports
• Two 10G/1G SFP+ ports
• One USB port
• Combined Link, Speed, Activity LED for each port
• PoE LED for each PoE port (S3300-52X-PoE+ and S3300-28X-PoE+)
• Power, Fan, and Stack ID system LEDs
• PoE Max system LED (S3300-52X-PoE+ and S3300-28X-PoE+)
• SRAM size and type: 256 MB DDR3 SDRAM
• Flash memory size: 64 MB SPI Flash
34
B