S3300-52X And S3300-52X-Poe+ Description; S3300-52X Front Panel And Back Panel Configuration - NETGEAR ProSAFE S3300 Hardware Installation Manual

S3300-52X and S3300-52X-PoE+ Description

This section describes the smart switch hardware features for models S3300-52X and
S3300-52X-PoE+.

S3300-52X Front Panel and Back Panel Configuration

The S3300-52X and S3300-52X-PoE+ models provide forty eight 10/100/1000 Mbps ports,
two dedicated 100M/1G/10GBASE-T ports, and two dedicated 10G/1G Gbps SFP+ ports.
Each port can sense the line speed and negotiate the duplex mode with the link partner
automatically. Model S3300-52X-PoE+ supports PoE+ on ports 1 through 48.
The following figures illustrate the front panel of models S3300-52X and S3300-52X-PoE+.
Power and Fan LEDs
Stack ID LED
Factory Defaults button
Reset button
Figure 2. Front panel model S3300-52X
Power, Fan, and
PoE MAX LEDs
Stack ID LED
Factory Defaults button
Reset button
Figure 3. Front panel model S3300-52X-PoE+
S3300 Smart Switch
Left LEDs: RJ45 SPD Mode LED
Right LEDs: nonfunctioning
10/100/1000 Mbps ports
Left LEDs: RJ45 SPD Mode LED
Right LEDs: PoE Mode LED
10/100/1000 Mbps PoE ports
Physical Description
11
10G ports
Link/ACT LEDs
SFP+ ports
USB port
Link/ACT LEDs
10G ports
Link/ACT LEDs
SFP+ ports
Link/ACT LEDs USB port