Table of Contents
Advertisement
Connections and Setup
Complete the Initial Setup
The menu system in your TV allows the TV's features to work properly.
Setup
Go Back
Closed Caption
...
Menu Language
English
Clock
--:--
Update Time
Current Channel Time
--:--
Sleep Timer
OFF
<L/R>: Select
Auto Channel Search
Go Back
Signal Type
Auto Channel Search
<L/R>: Select
Auto Channel Search
Go Back
Signal Type
Auto Channel Search
To search for available channels, press OK.
Running Auto Channel Search will erases list and labels.
If you have analog and digital channels, the
TV's search will take longer since it is look-
ing for both.
Auto Channel Setup
Go Back
Signal Type
Auto Channel Search
Progress:
Ananlog Channels found
Digital Channels found
Channel Search in progress. Press Clear to cancel.
Any channel already be found will be stored.
Once a channel search is in progress, the
Auto Channel Search menu looks like
this.
14
Set the Menu Language
The Menu Language of the Setup allows you to select your preferred
language for the menu system.
English is the default menu language. To choose another language,
press the right arrow button.
Z
Z
Z
Complete Channel Setup
Make sure you've connected the TV to cable and/or an off-air signal
Cable
before you start the next part of the setup.
...
Set the Signal Type
If you connected Cable to your ANTENNA/CABLE jack, the option is
chosen for you and you can press the down arrow button to continue.
To choose Antenna, press the right arrow button and then press the
down arrow button to continue.
Complete the Channel Search
With Auto Channel Search highlighted, press OK to begin the channel
search. If you lock the parental control settings, you must enter your
Cable
password before start the atuo channel search.
...
There are several things to be aware of when the TV's searches
for channels.
If you chose Cable as your signal type, the search will take some time
because it's looking for analog and digital channels, and then it's
removing scrambled channels found. Here is what happens during the
search:
1.
2.
Cable
3.
Running
2%
0
0
The search first looks for analog channels and places the number
of channels found next to Analog Channels found.
The search then looks for digital channels and places the number
of channels found next to Digital Channels found.
When the search is in progress, the Auto Channel Search menu
will look like the picture to the left. As long as Running remians
on the menu screen, the channel search is still in progress. To exit
the channel search and menu system, press CLEAR.
Chapter 1
Hide quick links:
Advertisement
Table of Contents
