Plug In The Tv; Put Batteries In The Remote; Turn On The Tv; How To Use The Remote Control To Complete The Initial Setup - RCA L19WD20 User Manual

Connections and Setup

Plug in the TV

Plug the end of the power cord into the back of the TV. For model L15W20, plug the power
cord into the power adapter, then plug the power adapter into the TV. Plug the other end of
the power cord into a grounded wall outlet. Insert the plug completely into the outlet. Do not
plug into an outlet controlled by a light switch.

Put Batteries in the Remote

• Remove the battery compartment cover from the back of the remote by pushing the tab
and lifting off the cover.
• Insert two fresh batteries. Make sure the polarities (+ and -) are aligned correctly.
• Replace the cover.

Turn on the TV

Turn on your TV by pressing the Power button on the top panel of the TV or ON•OFF on the
remote control.
INPUT SUB CH
WATCH TV
CH +
MUTE
VOL- VOL +
VOL VOL
CH -
GO BACK
MENU OK
14
ON•OFF
PRESETS
CC
SOUND
FORMAT
OK
button
FAV
INFO
CLEAR
Arrows
How to Use the Remote Control to
Complete the Initial Setup
The technical term is "Navigation" – how you move through the on-
screen menus. The theory is the same throughout the menu screens:
highlight your choice and select it.
With the Setup menu displayed, press the right arrow button to access
the Setup menu choices. Press the up or down arrow button to move
up or down within the menu. Items with an arrow (4) means there
are more items to choose from or a sub-menu available. Press the right
arrow or OK to display these.
Note: Highlighted means that the menu item stands out from other
menu items on the list (appears darker, brighter, or a different color).
Chapter 1