Table of Contents
Advertisement
Using the TV's Menu System
4
Main Menu
Audio
0
Go Back
Off
On
1
Equalizer Presets
Turning Sound Logic on will monitor a program's audio
2
Audio Processor
track and limit volume excursions to a minimum and
maximum volume range from the current volume setting.
3
Sound Logic
Acting like a dynamic range limiter, it compresses the
dynamic range to limit sudden volume increases (for
4
Audio Mode
example, the sudden increase in volume you sometimes hear
when a commercial starts).
5
SAP
6
Balance
7
Audio Connections
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to
select it. Press 3to return to the menu.
4
Main Menu
Audio
0
Default Audio Mode
Go Back
English
1
Equalizer Presets
Spanish
2
Audio Processor
French
The number of Audio Modes available
German
for the current program is 1.
3
Sound Logic
Italian
If the Default Audio Mode is available, then it
4
Audio Mode
Japanese
will be heard; otherwise, the mode listed
above is heard. Use the button above
Korean
5
SAP
to change the current program's audio.
Chinese
Audio Mode is only available for
6
Balance
digital-TV (ATSC) programs.
7
Audio Connections
A change in this screen is applied to all inputs.
Press OK to change the Currently Playing Audio Mode
(if more than one is available).
4
Main Menu
Audio
0
Go Back
Off
On
1
Equalizer Presets
SAP stands for "Second Audio Program". When SAP is
2
Audio Processor
available for a program, the SAP icon in the channel banner
will light up. SAP content can be another language,
3
Sound Logic
descriptions for the visually impaired, or audio not related
to the program (for example, music or news).
4
Audio Mode
If you set "SAP On" and SAP is available for a program, you
5
will hear SAP for any channel where it is available. SAP is
SAP
only available for analog (NTSC) programs.
6
Balance
7
Audio Connections
A change in this screen is applied to all inputs.
Press 5 or 6 to point to an option, then press OK to
select it. Press 3to return to the menu.
Main Menu
Audio
0
Set the balance using the left and right arrows on the
Go Back
remote control.
1
Equalizer Presets
2
Audio Processor
3
Sound Logic
4
Audio Mode
5
SAP
6
Balance
7
Audio Connections
A change in this screen is applied to all inputs.
Balance allows you to adjust speaker balance output. Use
the
and
keys to adjust the speaker balance left or right.
54
Sound Logic
Acting like a dynamic range limiter; it compresses the dynamic range to limit
sudden volume increases (for example, the sudden increase in volume you
sometimes hear when a commercial starts). Choose On or Off, depending on
your preference.
Audio Mode
Currently Playing
Audio Mode (1 of 1)
The Audio Mode menu lets you choose the default audio mode you want
Spanish
Change Audio
to hear for ATSC (digital TV) programs. If the Audio Mode icon (
banner lights, it means there is more than one audio mode available. The
system automatically sets the audio program to the default audio mode from the
menu when the channel you are viewing is a digital channel and the specifi ed
language is available for that program.
In the Audio Mode menu, highlight the default audio mode you usually want to
hear by pressing the up and down arrow buttons on your remote control. Press
OK to hear that language by default whenever available on a channel.
Some programs can have audio mode available that can be heard but that
cannot be set as the default. To select and hear those audio modes, navigate to
the "Change Audio" action button and select OK, or use the SOUND button on
the remote.
Note: You can change the Audio Mode temporarily by pressing the
SOUND button on the remote control. Changing channels reverts the
Audio Mode back to the default Audio Mode originally selected in the
menu.
SAP (Second Audio Program)
When turned on and available, Second Audio Program plays the analog
program's audio in a second language. SAP is also used to broadcast a
program's audio with descriptions of the video for the visually impaired. SAP
might also contain audio which is totally unrelated to the video.
Notes: SAP is broadcast in mono and is only available for analog
programs, not digital programs.
You can activate SAP (if available) temporarily with the SOUND button.
Changing channels or inputs reverts SAP back to the SAP menu setting.
Balance
The Balance setting applies to the internal speakers and the headphone output.
Balance is how much audio (loudness) gets sent to the left and right speakers.
Note: Balance applies if the Fixed/Variable Audio Output is set
to Variable Output, Speakers On. See the following page for more
information.
) in the
Chapter 4
Advertisement
Table of Contents
