Table of Contents
Advertisement
Using the TV's Menu System
•
Stereo Splits the incoming stereo audio signal into left and right front channels. Most TV
programs and recorded materials have stereo audio. The channel banner displays the word
Stereo when you tune to a program that is broadcast in stereo.
•
Adds greater depth and stereo separation to stereo audio signals. Delivers a panoramic
3D sound stage from stereo material.
•
Redirects the treble portion of the audio in the speaker system to make dialog more
understandable. Repositions and elevates the audio to the center of the TV.
•
Creates a virtual 5.1 surround sound from multichannel source material through any
two-speaker playback system.
Main Menu
Audio
0
Go Back
Sound Logic Off
1
Equalizer Presets
Sound Logic On
2
Audio Processor
Turning Sound Logic on will monitor a program's audio
3
Sound Logic
Sound Logic
track and limit volume excursions to a minimum and
maximum volume range from the current volume setting.
4
Audio Language
Acting like a dynamic range limiter, it compresses the
dynamic range to limit sudden volume increases (for
5
SAP
example, the sudden increase in volume you sometimes hear
when a commercial starts).
6
Balance
7
Fixed/Variable Out
A change in this screen is applied to all inputs.
8
Digital Audio Out
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
Main Menu
Audio
0
Go Back
Default Audio Language
English
1
Equalizer Presets
Spanish
2
Audio Processor
French
The number of Audio Languages available
3
Sound Logic
for the current program is 1.
German
4
Audio Language
Audio Language
If the Default Audio Language is available,
Italian
then it will be heard; otherwise, the language
5
SAP
listed above is heard. Use the button above
Japanese
to change the current program's audio.
6
Audio Language is only available for
Balance
Korean
digital-TV (ATSC) programs.
Chinese
7
Fixed/Variable Out
A change in this screen is applied to all inputs.
8
Digital Audio Out
Press OK to change the Currently Playing Audio Language
(if more than one is available).
Main Menu
Audio
0
Go Back
SAP Off
1
Equalizer Presets
SAP On
2
Audio Processor
SAP stands for "Second Audio Program". When SAP is
available for a program, the SAP icon in the channel banner
3
Sound Logic
will light up. SAP content can be another language,
descriptions for the visually impaired, or audio not related
4
Audio Language
to the program (for example, music or news).
5
SAP
SAP
If you set "SAP On" and SAP is available for a program, you
6
Balance
will hear SAP for any channel where it is available. SAP is
only available for analog (NTSC) programs.
7
Fixed/Variable Out
A change in this screen is applied to all inputs.
8
Digital Audio Out
Press
or
to point to an option, then press OK to
select it. Press
to return to the menu.
TruSurround, SRS and (o) symbol are trademarks of SRS Labs, Inc.
TruSurround technology is incorporated under license from SRS Labs, Inc.
68
Sound Logic
Monitors a program's audio track and limits volume excursions to a minimum
and maximum volume range from current volume setting. Acting like a
dynamic range limiter; it compresses the dynamic range to limit suggested
volume increases (for example, the sudden increase in volume you sometimes
hear when a commercial starts). Choose Sound Logic On or Sound Logic Off,
depending on your preference.
Audio Language
Currently Playing
Audio Language
The Audio Language menu lets you choose the default audio language you
None Available
Change Audio
want to hear for ATSC (digital TV) programs. If the Audio Language icon (
in the banner lights, it means there is more than one audio language or audio
format (Dolby Digital, DTS, etc.) available. The system automatically sets the
audio program to the default audio language when the channel you are
viewing is a digital terrestrial channel and the specified language is available for
that program.
In the Audio Language menu, highlight the default audio language you want by
pressing the up and down arrow buttons on your remote control. Press OK to
select whenever available on a channel to hear that Audio Language.
Some programs may have audio languages available that you can hear but can't
be set as the default. To select and hear those audio languages, navigate to the
"Change Audio" action button and select OK, or use SOUND button on remote.
Note: You can change the Audio Language temporarily by pressing
SOUND button on the remote control. Changing channels reverts the
channel back to the default Audio Language original selected in the menu.
SAP (Second Audio Program)
When turned on, Second Audio Program plays the program's audio in a second
language, if one is available. SAP is also used to broadcast a program's audio
with descriptions of the video for the visually impaired. Or, SAP might contain
audio which is totally unrelated to the video.
Notes: SAP is broadcast in mono and is only available for analog
programs, not digital programs.
You can activate SAP (if available) temporarily with the SOUND button.
Changing channels reverts SAP back to original SAP menu setting.
)
Chapter 4
Advertisement
Table of Contents
