Technics SA-DA10 Service Manual page 55

file:///C|/Documents%20and%20Settings/Administrateur/Mes%20documents/service/SA-DA10/p21.htm
13 Parts Location and Replacement Parts
List
TOP PREVIOUS NEXT
Notes:
Important safety notice:
Components identified by
Furthermore, special parts which have purposes of fire-retardant (resistors), high-quality sound
(capacitors), low-noise (resistors), etc. are used.
When replacing any of these components, be sure to use only manufacturers's specified parts shown in
the parts list.
The parenthesized indications in the Remarks column specify the areas or color. (Refer to the cover page
for area or color.)
Parts without these indications can be used for all areas.
Capacitor values are in microfarad (•F) unless specified otherwise, P=Pico-farads(pF); Farads.
Resistance values are in ohms, unless specified otherwise, 1K=1,000(ohms).
The marking (RTL) indicates that the Retention Time is limited for this item. After the discontinuation of
this assembly in production, the item will continue to be available for a specific period of time. The
retention period of availabilityis dependant on the type of assembly, and in accordance with the lows
govening part and product retention. After the end of this period, the assembly will no longer be
available.
[M] indicates in the Remarks columns indicates parts that are supplied by
The"(SF)" mark denotes the standard part.
Remote Control Unit: Supply period for three years from terminal of production.
Reference for O/I book languages are as follows :
file:///C|/Documents%20and%20Settings/Administrateur/Mes%20documents/service/SA-DA10/p21.htm (1 of 2) [21/01/2007 13:47:15]
mark have special characteristics important for safety.
MESA .