Opening And Closing Looper Cover And Work Support; Threading Procedure - Pfaff hobbylock 795 Instruction Manual

Opening and closing looper cover
and work support:
Push looper cover lever to the right,
swing cover in the direction of the arrow
and lower it.
To close the looper cover, push the
cover until it locks.
To open the work support, push it to the
left. To close the work support; push it
to the right until it locks.
A threading diagram is affixed to the
machine (A).
Threading procedure
Threading must be done correctly to
obtain a well-formed seam. Thread the
machine in the following sequence:
1. Left looper (yellow)
2. Right looper (red)
3. Right needle (green)
4. Left needle (blue)
Diagram B shows threading of the
thread guides behind the carrying
handle.
Diagram C shows threading of the
thread tension dials.
Now pull the respective thread into the
corresponding guides and tension discs.