Operating The Remote Control - EdgeStar AP14009COM-1 Owner's Manual

Mode Indicator
Automatic
Cool
Dehumidify
Fan Only

Operating the Remote Control

Power
Use the Power button
you first use the Power button
front panel will be illuminated in blue. The unit will remember the last used mode / settings if
you shut down and restart.
Auto-Restart:
used mode / settings once power is restored. The compressor will restart after 3 minutes.
Cooling Mode
Cooling mode cools and dehumidifies the air. If the ambient temperature drops below the
temperature you selected, the compressor turns off and the unit functions with the fan only.
When the temperature rises above the temperature you selected, the compressor turns on
again. The front panel lights will be blue.
Whether your desired temperature can actually be reached depends on the ambient conditions.
The room temperature remaining above the set temperature is normal.
To operate the unit in cooling mode:
1. Make sure the power cord is plugged into a power outlet.
2. Press the Power button
3. Press the Mode button
4. Select the Fan Speed by using the Fan Speed button
5. Set the thermostat by using the Up
adjustable between 64° F – 90° F in one degree increments. You can switch between
Fahrenheit and Celsius by pressing the
Note: The exhaust hose must be used during Cooling mode in order to cool a room.
14
Function
In Automatic mode, the unit will cool, dehumidify, or heat (some models)
depending on the ambient temperature. The mode and fan speed will change
automatically. The front panel lights will change to reflect the running mode.
In Cool mode the unit will cool the room. The front panel lights will illuminate
blue.
In Dehumidify mode the unit will remove moisture from the air. The front panel
lights will illuminate yellow.
In Fan Only mode the unit will operate as a fan and circulate air. The front
panel lights will illuminate green.
to turn the portable air conditioner on and off. By default when
If power to the unit is interrupted, the air conditioner will restart itself in its last
until the Cooling indicator
, the unit will begin to operate in cooling mode and the
on the remote control.
and Down
button.
is selected.
.
buttons. The thermostat is