Profibus Dp Interfaces - Siemens SIMOTION D410-2 Manual

Interfaces

3.3 PROFIBUS DP interfaces

Additional information
For information on the components that can be connected via DRIVE-CLiQ (setup,
connection, configuration, etc.) see
●
●
●
●
●
●
3.3 PROFIBUS DP interfaces
Properties
SIMOTION D410-2 DP provides two interfaces for connection on the PROFIBUS DP:
● PROFIBUS DP/MPI interface (X21)
● PROFIBUS DP interface (X24)
The interfaces can be run asynchronously or isochronously, equidistant.
SIMOTION D410-2 DP includes master and I-slave functionality.
Interface characteristics
Table 3- 6
Characteristics
Connector type
Cable type
Max. cable length
Maximum data rate
36
SINAMICS S120 Control Units and Additional System Components
SINAMICS S120 for AC Drives
SINAMICS S120
Commissioning Manual
SINAMICS S120 Safety Integrated
TM15/TM17 High Feature SIMOTION Terminal Modules
SIMOTION Terminal Modules TM15 / TM17
X21 and X24 interfaces
Manual
Function Manual
Manual
Type
9-pin sub-D socket
PROFIBUS cable
100 m at 12 Mbit/s
12 Mbit/s
Manual
Commissioning Manual
SIMOTION D410-2
Manual, 02/2012