Water Connection; Electrical Connection; Technical Information - AEG L 87480 FL User Manual

internal components and cause leak-
ages or malfunctions.
• Do not install and connect a damaged
appliance.
• Make sure to remove all packaging and
transit bolts before first use.
• Make sure that the mains plug is dis-
connected from the mains socket dur-
ing installation.
• Do not install or use the appliance
where the temperature is less than 0 °C.
• When you install the appliance on a
carpet floor, make sure that there is air
circulation between the appliance and
the carpet. Adjust the feet to have the
necessary space between the appliance
and the carpet.

Water connection

• Do not connect the appliance with old
hoses already used. Only use new ho-
ses supplied with the appliance.
• Make sure not to cause damage to the
water hoses.
• Do not connect the appliance to new
pipes or pipes not used for a long time.
Let the water flow for some minutes,
then connect the inlet hose.
• The first time you use the appliance,
make sure that the water hoses and the
couplings do not have leakages.

Electrical connection

• Make sure thet the appliance is connec-
ted to a correctly installed earthed
power outlet.

TECHNICAL INFORMATION

Dimensions
Electrical connection:
Level of protection against ingress of solid particles
and moisture ensured by the protective cover, except
where the low voltage equipment has no protection
against moisture
• Make sure that the electrical informa-
tion on the rating plate agrees with the
power supply.
• Do not use multiple plugs and exten-
sion cables. There is a risk of fire.
• Do not replace or change the mains ca-
ble. Contact the service centre.
• Make sure not to cause damage to the
mains plug and cable.
• Connect the mains plug to the mains
socket only at the end of the installa-
tion. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to discon-
nect the appliance. Always pull the
mains plug.
• If this appliance is supplied from a cord
extension set or electrical portable out-
let device, the cord extension set or
electrical portable outlet device must
be positioned so that it is not subject to
splashing or ingress of moisture.
• If the supply cord of this appliance is
damaged, it must be replaced by the
manufacturer, its service agent or simi-
larly qualified persons to avoid a haz-
ard.
DISCARD THE APPLIANCE
1.
2.
3.
Width / Height / Depth
Total depth
Voltage
Overall power
Frequency
Disconnect the mains plug from the
mains socket.
Cut off the mains cable and discard it.
Discard the door catch. This prevents
children or pets being accidently
closed inside the appliance. There is
a risk of suffocation (only for front-
loading appliances).
600 / 850 / 605 mm
ENGLISH
5
640 mm
230-240 V
2200 W
50 Hz
IPX4