Quick Start - Fluke 983 User Manual

WCaution
To avoid possible damage to the Particle
Counter:
•
Avoid using the Particle Counter in an
excessively dirty or dusty atmosphere.
Excessive particle intake can damage the
Particle Counter.
•
Remove the Isokinetic-Probe Cover (the
black cap) before use. Not doing so can
damage the Particle Counter.
•
Do not use a wrench to connect or
disconnect the Isokinetic Probe or intake
nozzle. The connection should be finger
tight.
•
If using the tilt stand, hold the
instrument while using the keypad.
Compliance
The Particle Counter complies with:
P, JIS B9921: 1997, 89/336/EEC, 73/23/EEC, EN61326:
1997, EN60825-1:2001, Federal Standard 209E

Quick Start

The Particle Counter may be used directly out of the box.
To immediately use the Particle Counter:
1. Read "Safety Information"
2. Remove the Isokinetic Probe Cover (the black cap)
3. Press the POWER keypad
1
4. Press to start sampling
Be sure to read the entire Users Manual for more detailed
information.
Particle Counter
Compliance
3