Seat Adjustments; Hour Meter - Gravely Pro-Turn 991200 Owner's And Operator's Manual

SEAT ADJUSTMENTS

WARNING: Make all seat
adjustments with unit stationary,
parking brake on and engine shut
off.
To adjust seat forward or backward:
1. While seated, move seat adjustment
lever to the side and slide seat into
desired position.
2. Release lever and slide seat forward or
back to ensure that seat locks into
position.
Tipping Seat Forward
When returning seat to operating position
seat will automatically lock in place.
1
1. Seat Release Lever
Figure 4

HOUR METER

Measures and displays (1) the amount of time
engine has been run, time spent on jobs and
service intervals. This time cannot be
cleared.
1.Pull seat release
lever backward. See
Figure 4
2.Tip seat forward.
Seat release lever is
spring activated.
Operation
1.Timer (TMR1)
Measures the time spent on individual jobs.
Press and hold the toggle button to reset the
timer to zero. TMR1 will then start measuring
engine run time until it is reset to zero again.
2.Service Alert
Displays maintenance interval reminders for:
• changing engine oil (CHG OIL)
• changing the hydraulic oil and filter
(CHG HYD OIL)
• servicing the air filter (SRV
AIRFILTER)
The alert starts counting down two hours
before the maintenance is due. The meter
flashes NOW when it reaches the
maintenance time.
Press and hold the toggle button to reset the
maintenance clock to zero after performing
the service.
3.Service Interval Presets
Hour meter is preset for recommended
service intervals.
Hydraulic oil and filter:
• First 75 hours, every 400 hours
thereafter.
Engine oil and filter:
• First 25 hours, every 100 hours
thereafter.
NOTICE: The preset engine oil service
intervals in the hour meter are normal
recommended intervals. Specific engine
manufacturer's recommendations may vary.
ROLLOVER PROTECTION
STRUCTURE (ROPS)
Frequently inspect ROPS and seat belt for
damage or loose hardware.
Use extreme care when working close to
fences, ditches, or on hills.
Check overhead clearance carefully before
driving under any objects.
ALWAYS wear seat belt while operating the
unit with the ROPS in the upright position.
EN - 19
Press and release the
1
toggle button (2) to
shift between different
functions.
Press and hold the
toggle button to reset
the timer or clear a
service message.
2
The hour meter has
three functions: