Section 8: Removing & Installing The Screen; Removing The Screen; Reinstalling The Screen - Montigo DL6315 Installation & Maintenance Manual

Section 8: Removing & Installing the Screen
Removing the Screen
Follow the steps below to remove, or install the fireplace screen and
door. Before beginning any screen or glass removal, make sure that the
unit has not been in operation and that it is at room temperature.
Step 1: Prepare to Lift out Screen Assembly
Locate the three tabs at the base of the screen.
Figure 20. Locate the three tabs at the base of the screen
Step 2: Lift out the Retaining Tabs and screen.
Pull the bottom of the screen outward, then slide out the screen from
the frame.
Store in a safe place. The Screen is very fragile and can be easily torn,
dented or deformed. Refer to Figure 20.b below.
Figure 20.b Lift out the Retaining Tabs and screen
XG0221

Reinstalling the Screen

Follow the two previous steps to re-install the Distinction fireplace
window.
NOTICE
Any safety screen, guard, or barrier removed for servicing an
appliance, must be replaced prior to operating the appliance
Installation
35