Instruction Manual Contents Section 8: Removing & Installing Screen And Door - Montigo R720 Installation & Maintenance Manual

R-series indoor residential fireplace
Hide thumbs Also See for R720:
Table of Contents

Advertisement

Section 8: Removing & Installing Screen and Window
Removing the Screen:
Follow the steps below to remove, or install the R720* / R820*
Before beginning any screen or glass removal, make sure that the unit
has not been in operation and that it is at room temperature�
Step 1: Prepare to Lift out Screen Assembly
Grip either end of the screen assembly and pull towards yourself�
The screen assembly is held to the unit by both friction and magnets�
Step 2: Lift out the Retaining Tabs and screen.
The Retaining Tabs are quite long and in most cases, this task would
be better performed by two people�
Once the Retaining Tabs have come away from the Fireplace, lift the
screen away and store in a safe place� The Screen is very fragile and
can be easily torn, dented or deformed� Refer to Figure 21a below�
Window Screen
Assembly
Ventilation slots
located at the bottom
of the Screen Assembly
Figure 21a� Screen Removal.
Removing the Window:
Follow the steps to remove, or install the R720*/R820* fireplace
window.
Glass Lifting
Tools
Glass Panel
Step 1: Use Glass Lifting Tools to Remove Window
Use the Glass Lifting Tools that are included with your fireplace
(see image bove). Attach one to each end of the window pane.
Make certain that they are firmly attached and secure.
XG0772 - 150105�1
Installation
Retaining
Tabs (2x)
R720 & R820 Power Vent Indoor Gas Fireplace
Step 2: Lift out Window from Grooves
The window is removed by first lifting upward on the glass and then
by pulling the bottom out from the groove in which it was located (see
image below).
Figure 21b. Window Removal (using glass lifting tools).
Once the bottom of the window is clear of the fireplace, lower the
window down from the upper groove in which it was located.
Window Screen
Assembly
Lift the window clear of the fireplace and store it in a safe place.
Ventilation slots
located at the bottom
of the Screen Assembly
Note: Never re-use the window if it has been broken, scratched or
damaged in any way. The window is made of tempered glass, and
although tempered glass is very durable - nicks, scratches or chips
can seriously impact the window's strength.
Glass Lifting
Tools
Glass Panel
Figure 21c� Window Removal.
Reinstalling the door:
Follow the four previous steps to re-install the R-Series fireplace
window.
Retaining
Tabs (2x)
Page 29

Advertisement

Table of Contents
loading

This manual is also suitable for:

R820

Table of Contents