Recall And Use The Dg-Id Number Registered In The Dg-Id Memory - Yaesu FTM-7250DR Operating Manual

Advanced Operation

Recall and use the DG-ID number registered in the DG-ID memory

1. Press the [ P1 ] key on the microphone, the infor-
mation of the current DG-ID is displayed.
2. Rotate the DIAL knob or press the [ UP ] / [ DWN ]
key on the microphone to select the number of
DG-ID List to recall.
3. Press the PTT switch to select the DG-ID num-
ber and return to the frequency display screen.
Or if five seconds passes, the selected screen
will return to frequency screen automatically.
• When using the DG-ID memory, the tag of the
DG-ID memory being used is displayed every
3 seconds.
• If the DG-ID memory is "00", DG-ID memory tag
is not displayed.
4. Press the [ P1 ] key on the microphone to switch to the DG-ID number display as shown
below. When the DG-ID memory is "00", no DG-ID tag is displayed, only the DG-ID
number "00" is displayed.
DG-ID Tag display à DG-ID Number display à Normal Screen
• If there is no operation for more than five seconds, the display returns to the normal
frequency display screen.
• Press and hold the [ P1 ] key on the microphone while on the frequency display screen.
The DG-ID memory returns to DG-ID memory "00" with one touch.
20
DG-ID Tag display
DG-ID Number display