Adjusting The Scanner Parameters - Ricoh D245 Service Manual

Scanner Unit

4.6.8 ADJUSTING THE SCANNER PARAMETERS


Adjust the following SP modes after you replace the scanner unit or each part of the scanner
unit:

SP4-008-001 (Sub Scan Mag. Adj): (page 4-69)

SP4-010-001 (L-Edge Regist Adj): (page 4-69)

SP4-011-001 (S-Edge Regist Adj): (page 4-69)

SP4-688-001 (ADF Adj Density): Use this to adjust the density level if the image density of
outputs made in the DF and platen mode is different.
SM 4-26 D245/D246/D247