Adjustment The Program Soft (Slr Function); Setting The Computer; Preparation; Adjustment Display - Pentax 76670 Service Manual

4. ADJUSTMENT THE PROGRAM SOFT (SLR function)

Caution: When replaced T100, the following procedure should be completed
Preparation：
Programmed software for 76670 (for SLR operation), USB cable (I-USB17)
Computer (Windows 2000 / XP), AC-adaptor (D-AC10), Light source (Shutter tester)
Temporary bottom cover (Hand made/exclusive item), Power supply (8V,3A)
Shutter tester (1/4000 can be measured), Diaphragm set ring F8 (KA-0-1A), FA (F) 35-80mm F4-5.6,
AF positioning jig (Square) for 27830, AF positioning jig (Cross) for 27250, Power adaptor,
AF chart for 2m x2 (Exclusive item), AF master lens for 2m, FA Macro 50mmF2.8,
Driver1.5mm (HD-M1.5)、

4-1. SETTING THE COMPUTER

Setting the computer (Page2) and
should be
completed

4-2. Preparation

When replaced T100 or CCD, the CCD ID number will be used
for digital adjustment
① Install battery cover for battery adaptor and temporally bottom cover
to the camera
② Set focus mode lever to [MF]
4-3. DISPLAY FOR ADJUSTMENT
When start the adjustment software, the following display will be opened
Menu Bar
A. Tool Bar
Product number
Menu display
C.
Adjustment items
Set up the VB run time (Page3)
76670
76670 -7/12-
B. USB connecting display
76670 SLR