Recording
Edit Insert (Remote Only)
Edit insert lets you record new video in place of previously recorded video without
replacing the audio.
To Edit Insert
1. Place the tape with safety tab intact
into the camcorder.
2. Place POWER switch in VCR.
3. Locate the place you want the edit
insert to stop and press PLAY/PAUSE
(PAUSE on remote).
4. Press COUNTER R/M for more than
two seconds on the camcorder to set
the time counter back to 0:00:00.
72
COUNTER R/M Button
POWER Switch in VCR
5. Press COUNTER R/M again for less
than one second to turn on memory
stop (M).
6. Press REW, locate the place you want
edit insert to begin, and press
PLAY/PAUSE (PAUSE on remote)
exactly at the beginning of the scene.
PLAY/PAUSE
Button
REW Button
(continued on next page)