Table of Contents
Advertisement
Recording
Recording Menu — Date/Time Display
The date and time must be set before it can be displayed and recorded on your
tapes. The clock cell must be installed as shown on the next page before the date
can be set and recorded.
To Set the Date and Time
1. Make sure the mode select dial is in
MANUAL.
2. Press the MENU button. The
recording menu will appear in the
viewfinder.
Shift Zoom
Tele Macro
Gain Up
Color Filter
Tape Length
Title
Date/Time
Sub Menu
4
3
3. Press
or
on the mode select dial
to highlight Date/Time.
6
4. Press
on the mode select dial to
display the date and time screen.
JAN 1.00
Set
Cancel
54
OFF
OFF
AGC
NOR.
T20
AM 12:01
MENU Button
4
3
5
,
,
Buttons (On
Mode Select Dial)
Mode Select
Dial In
MANUAL
4
3
5. Press
or
to enter the correct
4
month. Press
to go back.
6
6. Press
on the mode select dial to
start the day flashing.
7. Repeat steps 5 and 6 to set the year,
hour (including AM and PM), and
minutes.
5
6
8. Press
or
to highlight Set.
9. Press the MENU button. The
camcorder's internal clock will start
and you will return to the recording
menu.
Notes: Press MENU twice to start the
clock and remove all the menus from
the viewfinder.
If you enter an invalid date, Input Error
appears in the viewfinder. Press
5
6
, or
and enter the correct day.
6
, and
3
to go forward or
4
3
,
,
Advertisement
Table of Contents
