Attach The Adapter/Charger; Insert A Tape - RCA CC638/639 User Manual

First-Time Operation
To AC 100-
240V, 50/60 Hz
POWER
Indicator

2. Attach the adapter/charger.

Since the battery must be charged
before it can be used the first time,
attach the adapter/charger to the
camcorder.
A. Connect one end of the DC cable to
the DC OUT jack on the
adapter/charger.
B. Connect the other end of the DC
cable to the DC in jack on the
camcorder as shown above.
C. Plug the adapter/charger's plug into
an operating outlet. The adapter/
charger's POWER indicator will
light
4
Adapter/Charger
DC OUT Jack
DC Cable

3. Insert a tape.

• Slide EJECT.
• Turn the tape wheel on the cassette
to remove any slack from the tape.
• Insert the cassette with the tape
wheel facing up and the tape window
facing out.
• Press on the area labeled PUSH until
the cassette door locks into place.