Analyzing A Trendplot Or Scope Record - Fluke 190-102 User Manual

ScopeMeter® Test Tool 190 Series II
Users Manual
9 Select the desired trigger slope
(Slope:) and jump to Level:.
ENTER
10 Select the 0.12V or 1.2V trigger
level and accept all recorder
ENTER
options.
Apply a trigger signal to the red and black ext.
11
trigger banana inputs.
During recording samples are continuously saved in deep
memory. The last twelve recorded divisions are displayed
on the screen. See Figure 22. Use View All to display the
full memory contents.
To learn more about the Single Shot trigger
function, see Chapter 4 "Triggering on
Waveforms".
48
Note
Figure 22. Triggered Single Sweep Recording

Analyzing a TrendPlot or Scope Record

From a TrendPlot or Scope Record you can use the
analysis functions CURSORS and ZOOM to perform
detailed waveform analysis. These functions are described
in Chapter 3: "Using Replay, Zoom and Cursors".