Selecting an Input Channel
To select an input channel, do the following:
A
Press the required channel key (A...D):
B
- the channel is turned on
C
- labels for the F1...F4 keys are
shown. Press the channel key again
D
to turn the labels off/on (toggle).
- the channel key illumination is turned
on.
If the channel key is illuminated, the
mV
RANGE and MOVE UP/DOWN keys
RANGE
MOVE
are now assigned to the indicated
channel.
V
Using the Scope and Meter
Selecting an Input Channel
Tip
To set multiple channels to the same range
(V/div) as, for example, input A, do the following:
−
Select the input A measurement function,
probe setting and input options for all
involved channels
A
−
press and hold
B
−
press
and/or
A
−
release
Notice that all pressed keys are illuminated now.
The MOVE UP/DOWN key and the RANGE
mV/V key applies to all involved input channels.
1
C
D
and/or
17