Shield Engine Ass'y; Smps Board - Samsung ML-4600/XET Service Manual

Disassembly and Reassembly

3-26 Shield Engine ass'y

1. Before you remove the shield engine ass'y, you
should remove:
– Rear cover (see page 3-4)
2. Remove the two screws.

3-27 SMPS Board

1. Before you remove the SMPS board, you should
remove:
– Rear cover (see page 3-4)
– Shield engine ass'y (see above)
2. Remove the four screws and on the SMPS board,
unplug the two connectors from the SMPS board
and the one connector from the main board, then
remove the SMPS board.
3-18
3. Remove the four screws securing the shield
engine ass'y and remove the shield engine ass'y
from the main frame.
Samsung Electronics