Pick-Up Roller Ass'y - Samsung ML-4600/XET Service Manual

Disassembly and Reassembly

3-11 Pick-up Roller ass'y

1. Before you remove the pick-up roller ass'y,
you should remove:
– All covers (see page 3-2, 3-4, 3-5)
– LSU (see page 3-6)
2. Unplug all the connectors from the engine board.
3. Remove the four screws securing the plate and
remove the plate as shown below.
3-8
4. Remove the two screws and remove the roller
from the plate.
Note: When you reassemble the pick-up roller,
make sure that the right end of the pick-up
roller fits into the pick-up gear shaft.
Pick-up gear
shaft
Samsung Electronics