7 ] Installing The Media Pcb Assy; 8 ] Installing The Sub Assy Inlet - Brother P-Touch QL-570 Service Manual

[ 7 ] Installing the Media PCB ASSY
(1) Assemble the media PCB ASSY with the two screws.
Important: When replacing the media PCB ASSY, and then check the items
Media PCB ASSY
[ 8 ] Installing the Sub ASSY Inlet
(1) Put the harnesses of the sub ASSY inlet through the holes on the under cover.
(2) Insert the sub ASSY inlet to the hole of the under cover and put it until its hooks are
properly hooked.
Sub ASSY inlet
using the "MAINTENANCE SOFTWARE OPERATION" in APPENDIX 1.
Screws
Main body
Fig.3.2-30 Installing the Media PCB ASSY
Hooks
Harness
Fig.3.2-31 Installing the Sub ASSY Inlet (1)
III- 44
Under cover
Hole