8 ] Removing The Upper Cover - Brother P-Touch QL-570 Service Manual

[ 8 ] Removing the Upper Cover
(1) Remove the two screws A and three screws B from the upper cover.
(2) Release the three hooks to remove the upper cover from the under cover.
Note: The screws A are screw, bind B M2.6x4. The screws B are taptite, bind B M2.6x6.
Upper cover
Hook
Under cover
(3) Turn the upper cover upside down, and remove the filament tape which secures the
harness of the tape sensor PCB ASSY.
Tape sensor PCB
A SSY harness
Screws A
Fig.3.1-28 Removing the Upper Cover (1)
Fig.3.1-29 Removing the Upper Cover (2)
III- 19
Screws B
Hooks
Filament tape
Upper cover