Installing The Mecha Assy - Brother P-Touch QL-570 Service Manual

[ 3 ]

Installing the Mecha ASSY

(1) Set the two hooks A to the grooves on the under cover of the mecha ASSY.
(2) Fit the hole of the mecha ASSY into the boss on the under cover, and insert the two
hooks B of the mecha ASSY into the holes on the under cover.
(3) Secure the mecha ASSY with the two screws.
Hook B
Hook A
Hole
(4) Put the harnesses of the mecha ASSY through the three holes of the under cover
respectively as shown in the figure.
Under cover
Hooks
Flat cable of the head ASSY
Hooks
Full cutter motor harness
Screws
Hole
Mecha ASSY
Hook A
Hole
Boss Hook A
Fig.3.2-12 Installing the Mecha ASSY (1)
Hole
Hole
Fig.3.2-13 Installing the Mecha ASSY (2)
III- 35
Hook B
Under cover
Hole
FG harness ASSY
Tape feed motor ASSY
Cutter sensor harness
Rib
Mecha ASSY