Table of Contents
Advertisement
The pedal LED flashes red once.
20
Install the pedals
(Installing the Pedals, page
Vector Storage
If you are transporting your bicycle or not using Vector for an
extended period of time, Garmin recommends removing Vector
and storing it in the product box.
Other Compatible Devices
Edge 1000 Instructions
Pairing Vector with the Edge 1000
1
Bring the Edge device within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Turn on the Edge device.
3
From the home screen, select
Power.
4
Rotate the crank arm a few times.
5
Select your sensor.
When the sensor is paired with your Edge device, a message
appears, and the sensor status is Connected. You can
customize a data field to display Vector data.
Entering the Crank Length with the Edge 1000
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
From the home screen, select
Details > Crank Length.
3
Enter the crank length, and select
Edge 520 and Edge 820 Instructions
Pairing Vector with the Edge 520 and Edge 820
This procedure contains instructions for the Edge 520 and Edge
820. For more information about compatible devices, go to
www.garmin.com/manuals/vector3.
1
Bring your compatible watch within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Select
or Menu.
3
Select Settings > Sensors > Add Sensor > Power.
4
Rotate the crank arm.
5
Select your sensor.
6
Select Add.
When the sensor is paired with your device,
can customize a data field to display power data.
Entering the Crank Length with the Edge 520 and
Edge 820
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
Select
or Menu.
3
Select Settings > Sensors > Power.
4
Select your sensor.
5
Select Sensor Details > Crank Length.
6
Enter the crank length, and select
6
1).
> Sensors > Add Sensor >
> Sensors >
> Sensor
.
is solid. You
.
Forerunner
935 and fēnix
®
Instructions
Pairing Vector with Your Forerunner 935 and fēnix 5
Series
This procedure contains instructions for the Forerunner 935 and
fēnix 5 Series watches. For more information about compatible
watches, go to www.garmin.com/manuals/vector3.
1
Bring your compatible watch within range (3 m) of the sensor.
NOTE: Stay 10 m away from other ANT+ sensors while
pairing.
2
Hold
or MENU.
3
Select Settings > Sensors & Accessories > Add New >
Power.
4
Rotate the crank arm.
5
Select your sensor.
After the sensor is paired with your device, the sensor status
changes from Searching to Connected. Sensor data appears
in the data page loop or a custom data field.
Entering the Crank Length with the Forerunner 935
and fēnix 5 Series
The crank length is often printed on the crank arm.
1
Rotate the pedals a few times in order to activate Vector.
2
Hold
or MENU.
3
Select Settings > Sensors & Accessories > Power.
4
Select your sensor.
5
Select Crank Length.
6
Enter the crank length, and select
Appendix
Registering Your Vector System
Help us better support you by completing our online registration
today.
• Go to https://my.garmin.com.
• Keep the original sales receipt, or a photocopy, in a safe
place.
Upgrading Your Vector 3S to a Dual Sensing
System
Before you install the new right pedal, the left pedal must be
paired and connected to a compatible Edge device or the
Garmin Connect Mobile app.
1
Review the Vector installation instructions
Vector Components, page
2
Remove the existing right pedal.
3
Install the new right pedal
4
Rotate the crank arm.
5
Select an option to connect the right pedal to the left pedal:
• From your compatible Edge device, select
select your sensor, select Sensor Details > Pair Right
Power Sensor, and enter the sensor ID found on the
pedal.
• From the Garmin Connect Mobile app device settings,
enable the Right Pedal, and enter the sensor ID found on
the pedal.
5 Series
®
.
(Installing the
1).
(Installing the Pedals, page
> Sensors,
Other Compatible Devices
1).
Hide quick links:
Advertisement
Table of Contents
