Specifications - Ryobi RLT3725CH Operator's Manual

SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SERVICE
Servicing requires extreme care and knowledge and should
be performed only by a qualified service technician. For
service we suggest you return the product to your nearest
AUTHORISED SERVICE CENTR E for repair. When
servicing, use only identical replacement parts.
WARNING:
Observe all normal safety precautions related to
avoiding electrical shock.
WARNING:
To avoid serious personal injury, do not attempt to
use this product until you read thoroughly and
understand completely the operator's manual. Save
this operator's manual and review frequently for
continuing safe operation and instructing others
who may use this product.
WARNING:
The operation of any power tool can result in
foreign objects being thrown into your eyes,
which can result in severe eye damage. Before
beginning power tool operation, always wear
safety goggles or safety glasses with side shields
and a full face shield when needed. We
recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with
side shields. Always use eye protection
SAVE THESE INSTRUCTIONS
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
SPECIFICA TIONS
RLT3725CH
V oltage...................................................
Nameplate Power ................................................... 370 W
No Load Speed ................................................11,000 min
Cutting Line ........................................................... 1.4 mm
Max.Cutting Path .................................................. 250 mm
Sound Power Level ............................................. 94 dB(A)
RLT3725
V oltage...................................................
Nameplate Power ................................................... 370 W
No Load Speed ................................................11,000 min
Cutting Line ........................................................... 1.4 mm
Max.Cutting Path .................................................. 250 mm
Sound Power Level ............................................. 94 dB(A)
4
230V-240V~50 Hz
-1
230V-240V~50 Hz
-1