Ryobi RLT3725CH Operator's Manual page 6

SPECIFIC SAFETY RULES
ELECTRICAL SAFETY RULES
Make sure the cord is located so that it will not be
stepped on, tripped over or otherwise subjected to
damage or stress.
Do not abuse the power cord. Never carry the product
by the cord. Never pull the plug out of the power point
by the cord. Keep the cord away from heat, oil and
sharp edges.
For outdoors work use only suitably approved
extension cables with a min. conductor cross section
2
of 1.5mm The plug connectors must have earthing
contacts and be rain-water-proof.
Inspect extension cords for deterioration, cuts or
cracks in the insulation. Repair or replace the cords if
any defects appear.
A nameplate on the product indicates the unit's
voltage. Never connect the product to an AC voltage
that differs from this voltage.
If the power cord or extension cable becomes
damaged during use, disconnect the cord from the
supply immediately. DO NOT TOUCH THE CORD
BEFORE DISCONNECTING THE SUPPLY.
Electrical power should be supplied via a Residual
Current Device (RCD) with a tripping current of not
more than 30mA.
MAINTENANCE RULES
Maintain the product with care. Follow instructions for
changing accessories. Keep the p roduct dry, clean
and free from oil and grease.
Unplug the product before making adjustments or
repairs.
Do not use the product if parts have been damaged.
Check the product regularly to make sure that it will
operate properly and perform the intended function.
Check for alignment of moving parts, binding of
moving parts, breakage of parts and any other
condition that may affect the unit operation. Inspect
the unit's power connection. Any part that is damaged
should be properly repaired or replaced by a Ryobi
authorised service centre.
Keep the product clean of grass clippings and other
materials that may become lodged in the cutting lines
and air vents.
Never douse or squirt the product with water or any
other liquid. Do not use detergents or solvents. Keep
handles dry, clean and free from debris.
After each use, clean with a soft, dry cloth.
ENGLISH
WARNING:
Before carrying out any maintenance operations,
cut off the electric power supply by
disconnecting the plug from the mains.
If the cut-off blade is worn or breaks, have this
replaced by a Ryobi authorised service centre.
SERVICE RULES
Service on this product must be performed by
qualified repair personnel only. Service or maintenance
performed by unqualified personnel could result in
injury to the user and/or damage to the product. Such
service may also void your warranty.
Use only identical replacement parts when
servicing the product. Follow the instructions in
the Maintenance section of this manual. Use of
non-genuine parts or failu re to follow maintenance
instructions may create a risk of shock, serious injury
to the user and/or damage to the product. Such use may
also void your warranty.
STORAGE AND TRANSPORTATION RULES
Stop the motor when you are waiting to cut or when
you are walking from one cutting location to another.
Store the product inside in a dry place.
Store the product up high or lock it up to prevent
unauthorised use or damage. Keep the product out of
the reach of children.
Secure the product when transporting it.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
product. If you loan someone this product, loan these
instructions also.
2