Relative Operation - Fluke 8050A Instruction Manual

OPERATION
RELATIVE
RELATIVE (RELATIVE)
1.
Select range and function (use any
measurement range and function).
----"""T\-A-------------\
Measuring the relative reference
J
2. Connect test leads and take the desired
measurement to be used as the relative
reference. While taking the relative
reference measurement, set the
RELATIVE switch to ON. This will store - - - - - - - - - - '
the value as the relative reference.
RELATIVE
'='11
OFF
..
D
POWER
D.!.
OFF
....
3. Subsequent measurements will be
displayed as the difference between the
relative reference and measurement. See
insert.
INPUT
1.5V
dc
Storing the relative reference
Subsequent measurement of
1.9V
dc
4. To cancel the relative function, set the
RELATIVE switch to OUT.
INPUT
1.9V
dc
Figure 2·8. Relative Operation
2-10