Order Replacement Parts - Snapper 521E Operator's Manual

6. Be sure that all nuts, bolts, and screws are
securely fastened. Inspect all visible moving
parts for damage, breakage, and wear. Replace
if necessary.
7. Cover the bare metal parts of the blower
housing and auger with spray rust pre-
ventative lubricant.
8. Put the unit in a building that has good
ventilation.
9. If the machine must be stored outdoors,
block up the snow thrower to be sure the
entire machine is o the ground.
10. Cover the snow thrower with a suitable
protective cover that does not retain
moisture. Do not use plastic.
MAINTENANCE
HOW TO ORDER REPLACEMENT PARTS
Use only manufacturer's authorized or approved
replacement parts. Do not use attachments
or accessories not speci cally recommended for
this unit. In order to obtain proper replacement you
must supply the model number (see nameplate).
Warranty service is available only through Authorized
Service Dealers.
24