Table of Contents
Advertisement
Main Menu
Table Of Contents
Bulb
Hook
Connector
Fog Light Bulbs
When replacing, use the following bulbs.
Fog Light: 55 W
Clip
Under Cover
4. Unhook the hook, and pull out the
connector.
5. Remove the old bulb and insert the new
bulb.
6. Put the connector back into the headlight
assembly.
1. Remove the clip using a flat-tip screwdriver,
and lower the under cover.
uuReplacing Light BulbsuFog Light Bulbs
1Low Beam Headlights
Insert the clip with the central pin raised, and push
until it is flat.
1Fog Light Bulbs
NOTICE
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Continued
Push until the
pin is flat
251
Advertisement
Chapters
Table of Contents
