Acura TSX 2012 Online Reference Owner's Manual page 167

Main Menu Table Of Contents
uuHomeLink® Universal TransceiveruTraining HomeLink
■
Training a Button
1. Position the remote transmitter you wish to link 1 to 3 inches (3-8 cm) from the HomeLink
button you want to program.
2. Press and hold the desired HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink after 10 secs?
YES
Press and hold the
3.
programmed HomeLink
button for about a sec.
Does the device (garage
door opener) work?
YES NO
Training 4.
Complete
HomeLink LED
Press and hold the
5.
HomeLink button again.
The remote-controlled
device should operate.
Training Complete
166
NO
a. Press and hold the remote and the HomeLink
button at the same time. Then, while
continuing to hold the HomeLink button,
YES
press and release the button on the remote
every 2 secs.
Dose the LED blink within 20 secs?
Press and hold the HomeLink button again.
HomeLink indicator blinks for 2 secs,
is on. then remains on.
The remote has a rolling code. Press the
a.
"learn'' button on the remote-controlled
device (e.g. garage door opener).
Within 30 secs, press and hold the
b.
programmed HomeLink button for 2 secs.
1Training HomeLink
Retraining a Button
If you want to retrain a programmed button for a
new device, you do not have to erase all button
memory. You can replace the existing memory code
using this procedure:
1.
Press and hold the desired HomeLink button until the
HomeLink indicator begins to blink.
Standard transmitter
Indicator remains on for
NO
about 25 secs.
2. Continue to hold the HomeLink button and follow steps
1 - 3 under "Training a Button."
Erasing Codes
To erase all the codes, press and hold the two outside
buttons until the HomeLink indicator begins to blink
(about 10 to 20 secs). You should erase all codes
before selling the vehicle.
If you have any problems, see the device's
instructions, visit www.homelink.com, or call
HomeLink at (800) 355-3515.
Rolling code transmitter
Indicator blinks rapidly for
two secs, then remains on
for about 23 secs.