Main Menu
Table Of Contents
Playing the AM/FM Radio
VOL/
Knob
Press to turn the audio system
on and off.
Turn to adjust the volume.
AM/FM Button
Press to select a band.
TITLE Button
Press to switch the RDS name
on and off.
CATEGORY Bar
Press either side to display and
select an RDS category.
SCAN Button
Press to sample each of the strongest
stations on the selected band for 10 seconds.
To turn off scan, press the button again.
uuAudio System Basic OperationuPlaying the AM/FM Radio
Preset Buttons (1-6)
To store a station:
1. Tune to the selected station.
2. Pick a preset button and hold it
until you hear a beep.
To listen to a stored station, select a
band, then press the preset button.
SKIP Bar
Press and hold to search up and
down the selected band for a
station with a strong signal.
A.SEL (Auto Select) Button
Press to scan both bands and store
the strongest station in each preset.
To turn off auto select, press the
button again. This restores the
presets you originally set.
Selector Knob
Turn to tune the radio frequency.
Continued
143