Acura TSX 2012 Online Reference Owner's Manual page 113

Main Menu Table Of Contents
uuOperating the Switches Around the Steering WheeluDriving Position Memory System
■
Storing a Position in Memory
Memory Button 1
Memory Button 2
Set Button
■
Recalling the Stored Position
Memory Buttons
112
1. Adjust the driver's seat to the desired
position, and turn the ignition switch to ON
( w .
2. Press the SET button.
u
You will hear the beeper, and the
memory button indicator light will blink.
( 1 or
3. Press memory button
seconds of pressing the SET button.
u
Once the seat position has been
memorized, the indicator light on the
button you pressed stays on.
Automatic transmission models
( P .
1. Move the shift lever to
All models
2. Apply the parking brake.
( 1 or
3. Press a memory button (
u
You will hear the beeper, and the
indicator light will blink.
The seat will automatically move to the
memorized position. When it has finished
moving, you will hear the beeper, and the
indicator light stays on.
*
1Storing a Position in Memory
After you press the SET button, the storing operation
will be canceled when:
•
You do not press the memory button within five
seconds.
•
You readjust the seat position before the double-
beep.
•
You turn the ignition switch to any position except
( w
ON .
2 within five (
1Recalling the Stored Position
The seat will stop moving if you:
•
Press the SET button, or a memory button (
( 2
).
•
Adjust the seat position.
Automatic transmission models
•
Shift into any position except
( 2 ).
Manual transmission models
•
Release the parking brake.
( 1
or
P (
.