Setting Up Your Fishfinder - Raymarine C140w User Reference Handbook

Menu Item Description
Shallow Depth Alarm If the Shallow Depth
Value Alarm is set to ON, an
alarm is triggered if the
depth drops below the
value you specify.
Deep Depth Alarm Deep Depth Alarm
Switches the deep depth
alarm on or off. If a DSM
is not connected, this
cannot be set.
Deep Depth Alarm Value If the Deep Depth Alarm
is set to ON, an alarm
is triggered if the depth
exceeds the value that
you specify.
166

12.9 Setting up your fishfinder

Options
0002 ft to maximum
transducer range
Opening the fishfinder setup menu
1. Make a fishfinder window active.
2. Press the MENU button.
OFF, ON 3. Select Fishfinder Setup from the list of options.
Fishfinder setup menu options
This section describes the settings you can change using the
0002 ft to maximum
fishfinder setup menu. The setup menu contains settings that are
transducer range
likely to be changed infrequently.
Menu Item
Configure Preset
Frequencies
Depth Digit Size
Description Options
Enables you to adjust AUTO or manual
the frequencies used
frequencies.
for the four fishfinder
presets. For each
preset, you can select
AUTO for fully automatic
selection, or you can
manually specify the
frequency. You can
also reset all the
preset frequencies to
the factory defaults if
required.
Size of the digit that • Small
indicates the depth.
• Medium
• Large
C-Series Widescreen user reference